VMX-DIAL DEFINITIONS ::= BEGIN -- -- Copyright (c) 1994 OCTel Communication Corp. All rights reserved. -- -- This Specification is supplied AS IS, and Octel makes no warranty, -- expressed or implied, as to the use, operation, and performance -- of the Spec. -- -- VMX-DIAL private MIB definitions for the VMX200/300 DIAL Product -- family. -- -- Filename: octel-vmxdial.mib -- This MIB definition is provided for use with OCtel's VMX200/300 -- product only. -- -- Contact Person: -- VMX200/300 LAN Engineering Group -- Octel Communication Corporation -- 1001 Murphy Ranch Road -- Milpitas, CA 95035 -- -- NOTE: -- 1. This file will be published electronically in -- venera.isi.edu and can be obtained using ftp anonymous. -- -- 2. Sunnet Manager User: -- Sunnet doesn't support multi-dimensional table. To make this file works -- with subnet, the mnemonic for the second level table need to be replaced -- by the number it represents. Example: -- locEntry is a table entry, and -- route1 is defined as locroute.1 where locroute is locEntry.7 -- the above definition need to be changed as follows: -- . remove the definition for locroute -- . route1 is defined as locEntry.7.1 -- This need to be done for all multi-dimensional tables. -- -- MODIFICATIONS: -- Last Revision - 10/28/94 -- IMPORTS enterprises, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB sysDescr FROM RFC1158-MIB; octel OBJECT IDENTIFIER ::= { enterprises 662 } octelOIDs OBJECT IDENTIFIER ::= { octel 1 } octelPlatforms OBJECT IDENTIFIER ::= { octelOIDs 1} vmx200 OBJECT IDENTIFIER ::= { octelPlatforms 3 } vmx300 OBJECT IDENTIFIER ::= { octelPlatforms 4 } octelProducts OBJECT IDENTIFIER ::= { octel 3 } vmxDial OBJECT IDENTIFIER ::= { octelProducts 1 } config OBJECT IDENTIFIER ::= { vmxDial 1 } dNetstat OBJECT IDENTIFIER ::= { vmxDial 2 } location OBJECT IDENTIFIER ::= { vmxDial 3 } hwerr OBJECT IDENTIFIER ::= { vmxDial 4 } -- dNetstat subtrees message OBJECT IDENTIFIER ::= { dNetstat 1 } lanCh OBJECT IDENTIFIER ::= { dNetstat 2 } lanConn OBJECT IDENTIFIER ::= { dNetstat 3 } systemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "VMX System Name, from Configuration" ::= { config 1 } sysSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "VMX System Serial Number." ::= { config 2 } systemID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "VMX System Identification Number." ::= { config 3 } sentVoiceMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of voice messages sent to the networks" ::= { message 1 } recvVoiceMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of voice messages received from the networks" ::= { message 2 } sentFaxMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of fax messages sent to the networks" ::= { message 3 } recvFaxMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of fax messages received from the networks" ::= { message 4 } recvNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of name received from the networks" ::= { message 5 } playedRtNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Real Time network name played" ::= { message 6 } secSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of seconds of message sent to the networks" ::= { message 7 } secRecv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of seconds of message received from the networks" ::= { message 8 } lchNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of LAN channel available in the system." ::= { lanCh 1 } sec50pct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of second that 50 percent of lan channel is busy" ::= { lanCh 2 } sec75pct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of second that 75 percent of lan channel is busy" ::= { lanCh 3 } sec100pct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of second that all of lan channel is busy" ::= { lanCh 4 } lchInSendSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of second LCH is in used for sending message" ::= { lanCh 5 } lchInRecvSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of second LCH is in used for receiving message" ::= { lanCh 6 } outAttempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an outgoing lan connection is attempted" ::= { lanConn 1 } outRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an outgoing lan connection is rejected" ::= { lanConn 2 } outGotBusys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an outgoing lan connection is rejected, due to all LCH busy" ::= { lanConn 3 } inAttempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an incoming lan connection is requested" ::= { lanConn 4 } inRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an incoming lan connection is rejected" ::= { lanConn 5 } inGotBusys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time an incoming lan connection is rejected, due to all LCH busy" ::= { lanConn 6 } lanAvailPct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of LAN availability." ::= { dNetstat 4 } locTable OBJECT-TYPE SYNTAX SEQUENCE OF LocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of active Digital Network Location." ::= { location 1 } locEntry OBJECT-TYPE SYNTAX LocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains info about the Network Location." INDEX { locIndex } ::= { locTable 1 } LocEntry ::= SEQUENCE { locIndex INTEGER, locName DisplayString (SIZE (0..255)), locIpAddr IpAddress, locLinkType DisplayString, locInDomain DisplayString, locColocated DisplayString, route1 DisplayString (SIZE (0..255)), route2 DisplayString (SIZE (0..255)), route3 DisplayString (SIZE (0..255)), cattempts Counter, cfailures Counter, cdroppeds Counter, cbusys Counter, cdayMin INTEGER, cnightMin INTEGER, mdvcAttempts Counter, mdvcFails Counter, mdvcRetries Counter, mdfxAttempts Counter, mdfxFails Counter, mdfxRetries Counter, mdDiskfulls Counter, mdMbxfails Counter, mdMinute INTEGER, locPlayedNames Counter, locLinkdrops Counter, locAnalogstndbys Counter } locIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of this Location Entry" ::= { locEntry 1 } locName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "System Name of This Location Entry, SELF means this system" ::= { locEntry 2 } locIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Internet Address of this Location" ::= { locEntry 3 } locLinkType OBJECT-TYPE SYNTAX INTEGER { lowspeed(1), highspeed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of the network interface" ::= { locEntry 4 } locInDomain OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this location is in the same Uniform Numbering Plan domain. " ::= { locEntry 5 } locColocated OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this location is in the same location." ::= { locEntry 6 } locroute OBJECT IDENTIFIER ::= { locEntry 7 } route1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "First Entry in the Route Table for this location." ::= { locroute 1 } route2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Second Entry in the Route Table for this location." ::= { locroute 2 } route3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Third Entry in the Route Table for this location." ::= { locroute 3 } locConn OBJECT IDENTIFIER ::= { locEntry 8 } cattempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times LAN connection attempted." ::= { locConn 1 } cfailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times LAN connection to this location failed." ::= { locConn 2 } cdroppeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times LAN connection to this location dropped." ::= { locConn 3 } cbusys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times All LAN Connection is busy." ::= { locConn 4 } cdayMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes(day time) LAN connection is established." ::= { locConn 5 } cnightMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes(night time) LAN connection is established." ::= { locConn 6 } msgDelivery OBJECT IDENTIFIER ::= { locEntry 9 } mdvcAttempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of voice message delivery attempts to this location." ::= { msgDelivery 1 } mdvcFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of voice message delivery failures to this location." ::= { msgDelivery 2 } mdvcRetries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of voice message delivery retries to this location." ::= { msgDelivery 3 } mdfxAttempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fax message delivery attempts to this location." ::= { msgDelivery 4 } mdfxFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fax message delivery failures to this location." ::= { msgDelivery 5 } mdfxRetries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fax message delivery retries to this location." ::= { msgDelivery 6 } mdDiskfulls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message delivery to this location fails due to disk full." ::= { msgDelivery 7 } mdMbxfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of message delivery to this location fails due to mailbox verification failure." ::= { msgDelivery 8 } mdMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of message (in minute) delivered to this location." ::= { msgDelivery 9 } locPlayedNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Real Time Network Name Played from this location." ::= { locEntry 10 } locLinkdrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of time LAN connection dropped, High Speed link only." ::= { locEntry 11 } locAnalogstndbys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times Analog Standby used to this location." ::= { locEntry 12 } hwerrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwerrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of Hardware errors." ::= { hwerr 1 } hwerrEntry OBJECT-TYPE SYNTAX HwerrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Hardware Error table Entry" INDEX { heIdx } ::= { hwerrTable 1 } HwerrEntry ::= SEQUENCE { heIdx INTEGER, heType INTEGER, heSlot INTEGER, heMon INTEGER, heDay INTEGER, heHour INTEGER, heMin INTEGER, heCh INTEGER, hePrio INTEGER, heCnt INTEGER, heData1 OCTET STRING, heData2 OCTET STRING, heData3 OCTET STRING, heData4 OCTET STRING } heIdx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of this Hardware Entry" ::= { hwerrEntry 1 } heType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Error Type of this hardare error." ::= { hwerrEntry 2 } heSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot Number of this Hardware Error Entry" ::= { hwerrEntry 3 } heMon OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } ACCESS read-only STATUS mandatory DESCRIPTION "Month in which this Hardware Error Entry occurred" ::= { hwerrEntry 4 } heDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Day on which this Hardware Error Entry occurred" ::= { hwerrEntry 5 } heHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hour on which this Hardware Error Entry occurred" ::= { hwerrEntry 6 } heMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minute on which this Hardware Error Entry occurred" ::= { hwerrEntry 7 } heCh OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Channel Number of this Hardware Error Entry" ::= { hwerrEntry 8 } hePrio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority of this Hardware Error Entry" ::= { hwerrEntry 9 } heCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Frequency of this hardare error." ::= { hwerrEntry 10 } heData1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Data1 of this hardare error." ::= { hwerrEntry 11 } heData2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Data2 of this hardare error." ::= { hwerrEntry 12 } heData3 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Data3 of this hardare error." ::= { hwerrEntry 13 } heData4 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Data4 of this hardare error." ::= { hwerrEntry 14 } hwerrTrap TRAP-TYPE ENTERPRISE octel VARIABLES { sysDescr, heType, heSlot, heMon, heDay, heHour, heMin, heCh, hePrio, heCnt, heData1, heData2, heData3, heData4 } DESCRIPTION "A hwerrTrap signifies that the VMX system has hardware errors logged. This trap is sent if the user has configured it." ::= 1 END